Application:
The CPT-200 model consists of a host machine and software control system. A pressure plate is installed between the upper and lower beams to test the specimen. Mechanical part consists of load frame and attachments. Motor, decelerator and AC servo system under working bench construct force driving system. Control box, control and data processing software construct control and data processing system of testing machine.
Specifications:
Max test capacity : 200KN
Testing force accuracy : 1%
Resolution of force : ±1/300000
Compression space : 2750mm( can be customized)
Ball screw space : 2000mm
Pressing plate dimensions : 1900 x1600mm
Dimension : 2260x1600x4600 mm
Test Sample as picture below:
List of Tests
Typical sample preparation is as follows. A matrix of the tests shall be performed on flat pallets. Tests shall be performed with new pallets. Tests can be carried out on one test sample (first stiffness, then strength, when there is a declared nominal load) or on two separate samples. The tests are grouped into the three sections. The selection of tests and evaluation of pallet performance are set out in 1808611-2 and 1808611-3.
Audited Supplier 
){kind=link}
){kind=link}