Continuous Flow Microchannel Reactors (Metal)

• Application: Lab
• Model NO.: CM-DM & PM

Product Description

1.Summary

The welded metal micro-reactor adopts the latest seamless welding technology, which realizes the welding of the entire plane instead of the welding corners, and through a special process, it is possible to realize high-strength whole-surface welding without processing the weld seam, which greatly reduces The processing difficulty is reduced, the processing time is reduced, and the welding strength is much higher than that of resistance welding and butt welding.
The process side of the welded metal microreactor adopts the separation shear-combination-separation shear flow channel model, which takes into account the two factors of mass transfer and pressure drop, and maximizes the efficiency of the mass transfer process on the basis of minimizing the pressure drop. , At the same time, heat exchange plates with special heat transfer structures are integrated on both sides of the process board. Through efficient two-way convection heat transfer, the heat in the reaction process is released, and the small-scale and pilot-scale reaction process is safely and stably realized.

Suitable for liquid-liquid, gas-liquid homogenous or non-homogenous reaction.
Applicable for industrial flow chemical synthesis & process development.

2.Specifications  

·Temperature range: -40ºC-300ºC
·Pressure range: 0-7MPa
·Single plate fluid holding capacity: 14ml
·Channel length: 3m
·Feature size depth: 1000um
·Material of Construction: S.S 316L, titanium, Hc276, Monel, zirconium, etc.

3.Application

·For Lab Research and lab scale productions.
·Switch batch production to continuous production, solving the major hazards of explosion, ·low efficiency, severe pollution and large energy consumption.
·Extremely Exothermic Reactions
·High Temperature, High Pressure Reactions.
·Polymerization

4.Advantages

·Safety: Small amount of liquid holdup in ml, and less consumption of raw materials.
·High flexibility: Convenient reorganization of reaction modules with two or more feeding streams.
·Internal design: Excellent heat & mass transfer.

5. Technical Specifications
 

CM-DM&PM Continuous Flow Microchannel Reactors(Metal)
Model	CM-DM	CM-PM
Processing methods	Welding Multi-layer flat forming Connection without seal ring
Volume	9ml	80ml
Size	210×210×40mm	300*300*20mm
Throughput	~70T/Y	~1000T/Y
Material	TA2,SUS316L,HC276,HB-2,2205,904L etc	TA2, HC276,HB-2,2205,904L etc
import and export	Two in one out/one in one out
Interface	Thread + sealing ring/welding
Temperature Range	-30ºC-280ºC/-60-450ºC
Operating Pressure	0-50bar /0-80bar
Application	·For Lab Research and lab scale productions. ·Switch batch production to continuous production, solving the major hazards of explosion, ·low efficiency, severe pollution and large energy consumption. ·Extremely Exothermic Reactions ·High Temperature, High Pressure Reactions. ·Polymerization